The WordPress Specialists

Amazfit Verge Stuck in QR Code Screen (solved)


The Amazfit Verge is a popular smartwatch known for its fitness tracking features and sleek design. However, like any electronic device, it can encounter issues such as getting stuck on the QR code screen. This problem may prevent you from using your smartwatch effectively. If you find your Amazfit Verge stuck on the QR code screen, follow these troubleshooting steps to resolve the issue and regain functionality.

Restart the Amazfit Verge

Method 1: Restart the Amazfit Verge

The simplest and often most effective solution to resolve any software-related issue on the Amazfit Verge is to restart the device.

1. Press and Hold the Power Button: Locate the power button on your Amazfit Verge.

2. Hold the Button: Press and hold the power button until you see the option to power off.

3. Power Off and On: Select “Power Off” and wait for the watch to completely shut down. Then, press and hold the power button again to power it back on.

4. Check for Normal Operation: Once the watch restarts, check if it successfully boots past the QR code screen.

Method 2: Reconnect with Amazfit App

If restarting the Amazfit Verge does not resolve the issue, try reconnecting the watch with the Amazfit app on your smartphone.

1. Open Amazfit App: Launch the Amazfit app on your smartphone.

2. Access Device Settings: Navigate to the settings or devices section within the app.

3. Select Amazfit Verge: Locate your Amazfit Verge device and select it.

4. Initiate Sync: Look for an option to sync or pair the watch with the app.

5. Follow On-Screen Instructions: Follow any on-screen instructions to complete the pairing process.

6. Check for Updates: After reconnecting, check if there are any firmware updates available for your Amazfit Verge. Install any updates if prompted.

7. Restart the Amazfit Verge: Once the watch is successfully paired with the app, restart the Amazfit Verge as described in Method 1.

Method 3: Reset Amazfit Verge to Factory Settings

If the issue persists after restarting and reconnecting the Amazfit Verge, consider resetting the watch to its factory settings. Please note that this will erase all data and settings on the device, so proceed with caution.

1. Access Settings: On your Amazfit Verge, navigate to the settings menu.

2. Find Reset Option: Look for an option to reset or restore the watch to factory settings.

3. Confirm Reset: Follow the on-screen prompts to confirm the reset process. This may involve entering a security code or pattern.

4. Complete Reset: Allow the Amazfit Verge to reset to its factory settings. Once done, set up the watch again as you did when first purchased.

Method 4: Contact Amazfit Customer Support

If none of the above methods resolve the issue, it’s recommended to contact Amazfit customer support for further assistance.

1. Visit Amazfit Support Website: Go to the official Amazfit support website.

2. Submit a Support Ticket: Describe the issue you’re experiencing with your Amazfit Verge being stuck on the QR code screen.

3. Follow Up: Monitor your email or messages for responses from Amazfit customer support. They may provide additional troubleshooting steps or instructions tailored to your specific issue.

Additional Tips:

– Ensure Good Connectivity: Make sure your Amazfit Verge has a stable connection to your smartphone and the Amazfit app during troubleshooting steps.


– Keep Software Updated: Regularly check for firmware updates for your Amazfit Verge and install them to ensure optimal performance and compatibility.

– Use Compatible Devices: Ensure that the Amazfit Verge is compatible with the smartphone and operating system you are using for the Amazfit app.

By following these troubleshooting methods and tips, you should be able to resolve the issue of your Amazfit Verge being stuck on the QR code screen and restore normal functionality to your smartwatch. If the problem persists or you encounter any other issues, don’t hesitate to reach out to Amazfit customer support for further assistance.

About the author

Antonia Zivcic

I'm Antonia, a copywriter with over five years of experience in the industry. I find joy in exploring a wide array of topics through my writing. It's my passion to create engaging and compelling content that resonates with readers.

Add comment

The WordPress Specialists